Home > Hard Drive > Windows 10 Install Not Detecting Hard Drive

Windows 10 Install Not Detecting Hard Drive

Contents

Let's get started:Turn the computer off, unplug it, and take the case off. It is also possible that there are USB system updates available from your computer manufacturer or the manufacturer of the motherboard in it or the chipset on its motherboard (Intel, nVidia, the usb hdd works fine with others pc... Knowing you tested the drive in different computers tells me this is probably not your issue but using the same USB cable will cause the same results if bad. have a peek here

My eMachines hasn't been updated to SP3, and has had drives up to 640GB installed, and recognized. You may need to make them active as well.Click to expand... Reply Mark barbee on August 31, 2009 at 7:25 pm Here's one for ya. USB cables that come with drives like this also have greater chances to be faulty. http://www.tomshardware.com/forum/33393-63-windows-setup-doesn-detect-hard-drive

Windows 10 Install Not Detecting Hard Drive

No master or slave crap.I got by road blocks such as "reinstall Hal.dllback screen, reinstall hal.dll.Autocheck missing , skipping autocheck, and reboots and reboots over and over. It's more likely to be that they don't and have to make use of what they have. How would they know whether they have an IDE or SATA hard drive if they have never even heard of those abbreviations before?

You should try to get back to a C: prompt from wherever you are. In order for windows and the bios to read the correct size of the hard drive. Keep up the good work Reply Richard on August 10, 2007 at 9:10 am My 2nd EIDE (XP) drive installed with surprising ease -- no BIOS or jumper changes (cable select). Windows 10 Install Can't Find Hard Drive Really, just LOOK, until you understand what you are doing.

To verify this, do the following:1. Hard Disk Not Detected In Windows 7 Installation Thanks! Can anyone help? this page I'm so happy I found your website.

Suggestions? Windows 10 "we Couldn't Find Any Drives" Sometimes it woudl boot up and sometimes it wouldn't. If I disconnect the second drive the third one appears and vice versa. I intended on grabbing that old P2 this weekend, but that didn't happen.

Hard Disk Not Detected In Windows 7 Installation

Some machines works with usb3 and some others with usb2 wtf? :P Reply to nectons LucasD_1Dec 9, 2016, 10:55 AM Easy way to make the system see a disk is with browse this site The Hard Drive only came with a CD, no floppy disk. Windows 10 Install Not Detecting Hard Drive It does not show up in My Computer, and Device Manager shows it as working fine. Windows 7 Install Not Recognizing Hard Drive This is my first time to get my hands dirty to install.

I have changed the jumpers on the IDE hard drive, but Windows does not see the second HD.Any suggestions on how to successfully install the second HD.Thanks, Reply Bob on January navigate here Reply cher on August 21, 2007 at 5:30 am The instructions are great and have saved my sanity and hours of trying to start my computer in Dos when i do BTW, I was looking for the IDE socket on my Intel 77 board and, low and behold, it''s not there! Here's how to do that:Note:I am assuming that you have more than one computer on a network at home, and they are both running Windows XP.1. Windows 7 Install Cannot Find Hard Drive

and set to Auto. EXCELLENT!!!!thanks guys for creating this it sure is a help for newbies out there 🙂 as Kyle said waaaaaay back, "I did'nt know that disk management exist" hehehe Reply Bill R Find More Posts by RikFairlie August 16th, 2006, 04:20 PM #11 Clif Junior Member Join Date: Aug 2006 Posts: 5 Re: External hard drive not recognized I'm having exactly http://recupsoft.com/hard-drive/install-old-hard-drive-in-new-computer.html And it works perfect.

Cant do nothing else.Thanks. Windows 10 Cannot Find Hard Drive It also allows you to choose a SMALLER partition size. Once configured, hit Esc button to go back to main screen and then you typically hit F10 to save and exit, hit Y for yes and the pc should reboot and

Reply David on September 10, 2007 at 12:58 pm I must be missing a step.I cloned my 90GB IDE onto a 250GB IDE using a bootable HD Cloning CD.Everything appears to

According to Wikipedia, the size of the logical block addresses, is BIOS dependent! Ostensibly, the computer should now know it's there....Click to expand... Ask ! Windows 7 Install Doesn't See Hard Drive so Then i thought it was the bios but my bios in the compaq presario 900 is up to date.

A mechanical problem with the hard drive usually manifests itself in grinding or squeaking noises, random crashes or data loss. Drive worked, as it had worked on three other computers, and is full of data. Lord knows whether I will ever get a rebate out of this by the time I am done shipping and receiving and swapping. this contact form Dismiss Notice TechSpot Forums Forums Software Windows Today's Posts Windows XP, wrong HDDcapacity?

A+ on the info! Once I found you I was just a few minutes from nirvana! Join the community here, it only takes a minute. What I should have said is that the situation is now so bad that it will take a lot of luck or technical expertise to get that machine up and running.

I'll be back for more later. Tried all suggestions possible as found on the net. As stated in the OP, Windows Server 2003 was able to recognize the drive and install fine. and ur write he DIDNT start off with TAKE drive out of box… jeeees….

always make regualr backups and don't rely on one hard drive for your crucial data.I had a Maxtor drive and one day my PC couldn't 'see' it. The physical installation is actually pretty easy. Two hardrives are Western Digital and one is a Maxtor.They all are marked master slave etc. TekChick View Public Profile Send a private message to TekChick Find More Posts by TekChick May 31st, 2006, 01:53 PM #5 slpgdragon Junior Member Join Date: May 2006 Location:

When I insert the CD on the drive I am getting a dialog box that I require 256MB memory. Now I want to remove this and install Ubuntu. To assign a drive letter to it, look at the bottom of the window where you will see the disks listed once again usually with a blue line above it. This then 'initializes' the drive and it works normally.

Nightmare on partition street? solved Windows 7 installation wont detect hard drive solved Windows 7 Professional is not Starting up on my laptop, could not detect hard drive Windows 10 setup only detects part of I just bought a ATA 320GBHD. What I'm saying, and without a spare computer here (I have an old P2 350 I can get from my parent's attic, maybe tomorrow...) I can't test it to be sure,

You might open the computer and find that there is no room to add a second hard drive, or that you have to replace the hard drive cable in order to